Duplo DF-1000, Инструкция по эксплуатации

Страница: 16 / 86

1-6
2. NAMES AND OPERATION OF CONTROL PANEL
No. Name Operation
Start key Press to start paper folding.
Stop key Press to stop paper folding. Pressing this key at the function setting mode
screen registers that setting.
Test key Press to test fold two sheets of paper.
Mode key Press to switch the function setting mode.
Chapter 3 APPLIED USE “4. FUNCTION SETTING MODE”
( p.3-11)
Clear key Press to change or erase the number of sheets to be processed or paper
length entered.
Numerical keys (0 to 9) Press to enter the number of sheets to be processed or paper length.
Speed key Press to select the processing speed from five levels (Speed 1 to 5).
When the power is turned on, the speed used the last time is displayed.
Folding plate 1 folding
stopper adjusting key Press to adjust the position (folding position) of the folding stopper of
folding plate 1.
Folding plate 2 folding
stopper adjusting key Press to adjust the position (folding position) of the folding stopper of
folding plate 2.
Adjustment registration
key If the position of the folding stopper has been finely adjusted in standard
folding operations, the adjustment value can be registered with this key.
Custom folding
registration key Press to register the position of the folding stopper and stacker roller which
have been moved when using custom folding modes.
Custom folding
registration lamp When this lamp is lit, it means that the custom folding mode is registered.
Folding mode key Press to select the folding mode from five standard folding modes. If the
custom folding mode is registered, use this key to select it.
Standard folding lamp Displays the folding mode selected from five standard folding modes.
When a folding mode registered with the folding stopper position
adjustment value is selected, the corresponding lamp blinks.
Liquid crystal display
(LCD) Displays the size of standard paper stacked on the paper feed tray (A3 to
B6), paper length registered, and error messages.
Numerical display
(Counter) When using the add count mode, displays the number of sheets processed.
When using the subtract count mode, displays the number of sheets left to
be processed.
11 13
10
12 14 15 16
7 3 5 2 1 4 8 9 6