background image

t: 

01905 797989

e: 

[email protected]

 | w: 

www.duomo.co.uk

11

Commisioning

It is strongly recommended that this GS300Mc gas detection system is commissioned and serviced by Duomo Commissioning Engineers or engineers 

approved by Duomo. A quotation for commissioning or service will be provided upon request. 

Email site details and preferred date for commissioning or service to [email protected] to the Duomo Service Department. Or call 

+44 1905 797989

The benefits of this equipment being commissioned by Duomo are:

On board spares - 

 If for whatever reason this equipment doesn't function correctly Duomo engineers will have spares on board to ensure that the

commissioning is successful.

A Duomo Commissioning Certificate is provided - 

A certificate from the original maufacturer ensures that the commisioning or servicing carried

out is at a high professional standard by a competent and qualified service engineer.

It is prudent to make electrical connection to the detector terminal plus when withdrawn and leave the plug off the detector so that the Duomo Engineer is 

the first to power up the unit on site. This allows wiring to be checked prior to commissioning and avoids damage due to incorrect connection. Guarantees 

for this product will become void if damage is caused by the installer.

Maintenence

This detector must be function checked as described above using calibrated test gas every 6 months. 

To arrange for a Duomo engineer to conduct this work or to arrange a service contract please call 

+44 1905 797989

.

Commisioning, Service & Maintenence

Notes

Содержание GS300Mc













Отзывы: