DUNIWAY Stockroom T-752A-F110, Инструкция по эксплуатации

Страница: 15 / 59

EMAIL: info@duniway.com FAX: (650) 965•0764
TOLL-FREE [US/CA]: (800) 446•8811 TELEPHONE:
(650) 969•8811
48501 Milmont Drive • Fremont, CA 94538
DUNIWAY STOCKROOM CORP.
Page 6
PIN Function Output Description
1 CHANNEL 1 SET POINT relay Common See "Set Point Operation"
2 CHANNEL 1 SET POINT relay Normally closed (NC) See
"Set Point Operation"
3 Earth ground
4 Digital ground
5 Voltage output -15 V See NOTE 1
6 Voltage output +15 V See
NOTE 1
7 Voltage output +5 V See NOTE 2
8 CHANNEL 1 TTL input See
"Mode of Operation"
9 CHANNEL 1 SET POINT relay Normally open (NO) See "Set Point Operation"
10 Voltage output +12 V See
NOTE 1
11 CHANNEL 1 SET POINT status +5 V See NOTE 3
12 CHANNEL 1 current monitor See
"Analog Output"
13 CHANNEL 1 (-) HV status +12 V See NOTE 4
14 CHANNEL 1 HV monitor See
"Analog Output"
15 CHANNEL 1 (+) HV status +12 V See NOTE 5
NOTES
1. PIN 5-6, 10 : Nominal output available for external use; current limit: 0.2 A
2. PIN 7 : Nominal output available for external use; current limit: 0.2 A
(Same as PIN 12 on the AUXILIARY I/O port)
3.
PIN 11
: Nominal output available when CHANNEL 1 relay is active
4. PIN 13 : Nominal output available when CHANNEL 1 high voltage (HV)
operation is ON and output polarity is negative
5. PIN 15 : Nominal output available when CHANNEL 1 high voltage (HV)
operation is ON and output polarity is positive
All MISC I/O functions are identical and not additional
to those found in the AUXILIARY I/O connector.
NOTE
Since 1976
Table 1. MISC I/O pin assignment