Duncan Enviro DD30 страница 10 Скачать руководство пользователя | Manualshive

Страница: 10 / 95

background image

8

SAFETY - General (Continued)

Appropriate Dress

Wear close fitting clothing and avoid rings or other forms of
jewellery which could become caught in the machinery.

People with long hair must have it securely fixed and confined
close to the head.

Refer to local safety standards for protective clothing and
recommended safety equipment.

Adequate protection, such as a face mask, should be worn if
operating this machine in dry and dusty conditions.

Transport This Machine Safely

Ensure that all linkage pins and security clips are fitted correctly.
With trailing machines tow with the drawbar only, as this is the
only safe towing point on the machine.

Always check that bystanders (especially children) are well clear
(front and rear) before starting and moving the tractor and the
machine.

Plan safe routes of travel, and be aware of power lines and
other roadside hazards. Take particular care when towing
implements on hillsides.

Do not ride or allow passengers on the machine.

This machine is not designed to carry passengers, and no riders
are permitted.

Road transport

On public roads,
• A speed of 40km/h must not be exceeded.
• Do not operate during the hours of darkness unless standard
lights are fitted and clearly visible. (This also applies when
visibility is limited, e.g., in foggy conditions.)
See the guidelines in the

Vehicle Dimensions and Mass Rule

,

issued by the Land & Transport Safety Authority.

Avoid tip-overs

Avoid holes, ditches and obstructions which may cause the
machine to tip over, especially on hillsides. Never drive near the
edge of a gully or steep embankment - it might cave in. Slow
down for hillsides, rough ground and sharp turns.

‘Renovator AS3000/3500’

Safety

«
...
8
9
10
11
12
...
»

Содержание Enviro DD30
































































































Отзывы:

Нет отзывов

Похожие инструкции для Enviro DD30

Бренд: Campbell Страницы: 18

Бренд: Vector Страницы: 4

Бренд: Parker Страницы: 54

Бренд: NARGESA Страницы: 50

Бренд: YardCraft Страницы: 17

Бренд: Obdstar Страницы: 10

D-IMager EKL3104

Бренд: Panasonic Страницы: 13

Бренд: Labokey Страницы: 5

Бренд: E-Z Trail Страницы: 8

Бренд: B&K Страницы: 10

Бренд: Federal Signal Corporation Страницы: 4

Бренд: ParaBody Страницы: 7

Бренд: lancer Страницы: 3

Бренд: lancer Страницы: 12

Бренд: R2 Страницы: 26

Бренд: Macht Dental Страницы: 8

Бренд: Parkside Страницы: 58

MiniLift160 Classic

Бренд: Handicare Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды