Dump Dolly Power Скачать руководство пользователя страница 5

Страница: 5 / 7

Electric

Maintenance

The battery should be charged nightly with the enclosed maintainer/charger.

Connect the charging wire on the Dump Dolly to the connecting end of the

maintainer/charger. Then just plug in the charger to a 115/120 volt outlet.

Indicator lights on the maintainer/charger will let you when charging or

charged. A fully charged battery will do the job of operating the motor for

many fully loaded lifts. The weight of each load and the frequency of use

will determine if the Dump Dolly should be charged more often than once in

any 24 hour period.

The four plastic carriage wheels are not self lubricating and may need to be

occasionally lubricated with a good quality spray or liquid lubricant.

Lubricate only when necessary.

Содержание Power

Страница 2: ...er Hooks Orange Black hooks attached to the top of the dolly to place on rim of the dumpster Dumpster Latch vary by models Used for 8 yard dumpsters to prevent dolly from falling forward instead of onto the dumpster 2 ...

Страница 3: ... plate under the can OR place can onto the nose plate 2 Place the elastic cord around the base of the can 3 Loosen the trash can clip knob 4 Lift the trash can clip up then down and secure to the rim of the can 5 Tighten the trash can clip knob Note Do not over tighten 3 ...

Страница 6: ...nt the current Power Dolly design but still allow for understanding how it functions CAUTION Operate only when leaning on dumpster THE POWER DUMP DOLLY HAS SAFETY SWITCHES AT THE TOP AND BOTTOM TO STOP THE SLIDING CARRIAGE WHEN IT REACHES THE LIMITS OF THE TOP AND BOTTOM WHILE HOLDING DOWN THE BUTTON SHOULD THE WINCH CONTINUE TO RUN WHEN AT THE BOTTOM CAUSING SLACK IN THE 6 ...

Страница 7: ...CTION SHOULD THIS OCCUR IMMEDIATELY STOP PRESSING THE OUT DOWN BUTTON AND PRESS THE IN UP BUTTON THIS WILL TEMPORARILY ALLOW SLACK IN THE STRAP UNTIL THE STRAP BECOMES TIGHT AND THE CARRIAGE STARTS GOING UP RELEASE THE BUTTON AND NORMAL USE CAN NOW RESUME FOR MORE INFORMATION CALL325 227 8051 7 ...