Electric
Step 2: Place the Power Dump Dolly onto the dumpster
1. While holding the trash can, lean the Dump Dolly backwards onto the
leading edge of the dumpster and allow the dumpster latch, located
near dumpster hooks, to fall in place against the dumpster lip.
Step 3: Lift trash into the dumpster
1.
Press the “IN” button on the stationery button near the handle to raise
the carriage. Up motion will automatically stop at the top.
2. Manually lift the attached carriage with container attached, and dump
trash into the dumpster.
Step 4: Return carriage to the floor
1.
To return can and carriage to the bottom, press the “OUT” button until
the carriage is back at the bottom then release button. (see safety
note on page 6).
2. Carriage will automatically stop when at the bottom. Release the
button.
Caution: always return carriage to the bottom before
removing from dumpster
!
3.
DO NOT OPERATE POWER DOLLY USLESS IT IS LEANING ON THE
DUMPSTER AS INTENDED. WHEN OPERATING IN THE UPRIGHT
POSITION, INJURY AND DAMAGE TO DUMP DOLLY CAN INCUR.
4
