Duluth Forge FDI32R Скачать руководство пользователя

Страница: 1 / 32

VENT-FREE GAS

FIREPLACE INSERT

OWNER’S OPERATION AND

INSTALLATION MANUAL

MODEL FDI32R

PFS

WARNING: If the information in this manual is not

followed exactly, a fire or explosion may result causing

property damage, personal injury or loss of life.
— Do not store or use gasoline or other flammable va-

pors and liquids in the vicinity of this or any other

appliance.

— WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any

phone in your building.

• Immediately call your gas supplier from a neighbor’s

phone. Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire

department.

— Installation and service must be performed by a quali-

fied installer, service agency or the gas supplier.

WARNING: This appliance is equipped for Natural and

Propane gas. Field conversion is not permitted other than

between natural or propane gases.

Visit us online at www.FACTORYBUYSDIRECT.com

for a list of mantels used with this product.

Questions, problems, missing parts?

Before returning to your retailer, call

our customer service department at 1-855-607-6557, 8:00 am - 4:30 pm EST,

Monday through Friday or email

[email protected]

Содержание FDI32R

































Результаты поиска

Содержание FDI32R

Отзывы:

Похожие инструкции для FDI32R

Бренды по названию

Популярные бренды

Duluth Forge FDI32R, Руководство владельца по эксплуатации и установке

Результаты поиска

Содержание FDI32R

Отзывы:

Похожие инструкции для FDI32R

Бренды по названию

Популярные бренды