Duke 5R-DBPS, Инструкция по установке и эксплуатации

Страница: 29 / 44

29
Owner’s Manual for Duke Flexbake 5
TM
Proof and Bake Oven with WiFi Connectivity
PROGRAMMING CONTROLS - continued
TOOLS (TOOLS)
FACTORY (FACTORY SETTINGS)
• For factory and service use only
• For factory and service use only
NETWORK CONFIGURATION
OVERVIEW
This unit is capable of being a connected device. Firmware
updates, recipe changes (upload and export), and diagnostic
information can be provided and accessed remotely when con-
nected. The unit can be connected via wired Ethernet Cat5e
or wirelessly to the in store access point (router). The Ethernet
port is located on the lower rear of the unit.
Figure: Ethernet Port
How to access these features
1. Connect your oven to your in-store network. (see Network
Configuration section)
2. Create an account and register your new oven or register
this oven to an existing account.
NOTE : The franchisee should create a master account for all
stores, and then assign manager access, if desired.
Scan the QR code to the right or
visit the website:
https://connected.dukemfg.com/Subway
NETWORK REQUIREMENTS
Duke FlexBake 5 (FB5) utilizes an internet connection to offer
the following features:
• Remote recipe updates
• Remote diagnostics
• Remote firmware updates
Duke provides a cloud solution called the Duke
Connected Equipment Platform to make these
remote features available.
In order take advantage of these features, please ensure that
the following types of internet traffic are allowed from your
store IT networking and security equipment.
Network Firewalls
The FB5 has capabilities with both WiFi and ethernet network-
ing. When you connect the FB5 to a local area network (LAN)
using either of these modes, the FB5 will attempt to connect to
the cloud.
If you have a network firewall in use in your location, please be
sure to allow (whitelist) the following rules for the FB5 and the
Duke Connected Equipment Platform website.
URL Port Protocol
connected.dukemfg.com 443 TCP
iot.connected.dukemfg.com 443 UDP/TCP