background image

ENGLISH

17

TIPS

Using a wide-screen monitor

• This monitor has a screen mode selection feature. If an incompatible screen mode is

selected to play certain software, such as a TV program, the image would appear different
from the original. Take this into consideration when making screen mode choices.

• Use of this monitor in its enlarged display mode with the wide feature enabled in coffee

shops, hotels and other establishments for commercial or pubic viewing purposes could
infringe on the copyright holder’s right protected by Copyright Law.

• When a normal 4:3 image is displayed over the entire screen in the PANOR. mode, not the

Wide mode, parts of the periphery of the image may disappear and/or appear distorted in
some cases. Use the 4:3 mode to view images, which were created in 4:3 mode.

This mode allows 4:3 content to be viewed without picture distortion.

•  Composite / S signal (video1 input) and componet (SD1 480i) signal applicable for all size

modes.

• For component (HD1: 480p) signals, the display mode is selectable among 4:3, MOVIE1, and

FULL.

• For component (HD3: 1035i, 1080i, 720p) signals, the display mode is not selectable.
• If an S1 or S2 image is input from the S image of video1 , the S1 image would be set to

FULL, and the S2 image would be set to MOVIE1.

Displays by Selecting the DISPLAY SIZE (VIDEO input)

When you want to

Set the display

size to

Input signal

Display

screen

Remarks

Play a 4:3 image in a 16:9 screen
faithfully.

4:3

Blanking occurs on both sides.

Play a 4:3 image in a 16:9 screen
with the height and width of the
middle of the screen enlarged on
equal scales and with both sides
appearing somewhat enlarged.

PANOR.

(Panoramic)

The 16:9 VISTA size image in the
4:3 image is faithfully reproduced
on the 16:9 screen.

MOVIE1

• The 4:3 image is called a letterbox

image.

• In some cases, some slight

blanking may remain at the top
and bottom.

The 21:9 Cinema size image in the
4:3 image is expanded vertically on
the 16:9 screen.

MOVIE2

In some cases, some slight
blanking may remain at the top and
bottom.

Play a 4:3 image faithfully in a 16:9
screen in the standard vertical size
and horizontally squeezed.*

FULL

* An image with an aspect ratio of

16:9 shrunk horizontally to 4:3 to
display in a 4:3 screen

(4:3 signal)

(Vista)

(Cinema)

(Squeez)

00u24121UE  01.9.19 11:50 AM  ページ 17

Содержание ImagePro P42











































Отзывы: