English -
26
Chapter 7 Descriptions of major functions
7.1 I would like to automatically adjust the image to have
best brightness and focusing performance (Auto
Tune)
1. Press [AUTO TUNE] on the
remote control
or
control panel
to adjust
automatically.
7.2 I would like to switch image sources
The default of image source is
Live Image
. Press
[VGA 1]
on the
remote
control
or
control panel
to switch setting, and DVP510A as well as audio
output will switch among the following four modes in turn:
1. Live images (default)
2. VGA IN(1)
3. VGA IN(2)
4. DVD
(C-Video/S-Video)
<Note> VGA IN mode will be switched to DVD mode automatically in
turn when it is not connected to input equipment.
<Remark> This button is disabled in C-VIDEO Out mode.
7.3 I would like to set the image source of VGA OUT2
Press [MENU] on the
remote control
or
control panel
to enter the setting
menu
1. Press [
] or [
] to the [Advanced] menu.
2. Press [
] to enter [VGA OUT2].
3. Press [
] or [
] to select [VGA OUT(1)/VGA IN(1)/VGA IN(2)/DVD].
4. Press [MENU] to exit.
<Note> VGA IN mode will be switched to DVD mode automatically in
turn when it is not connected to input equipment.
<Remark> If VGA OUT(1) is connected simultaneously, the audio
output will be based on VGA OUT(1).
Содержание DVP510A
Страница 10: ......
