Dukane 9080WUSS Скачать руководство пользователя страница 23

Страница: 23 / 90

Installation of the Projector

6. Starting the projector up.

Press the

button on the projector or the

button on the remote control to start up the

projector.

7. Adjusting the projector's angle, Lens Shift, Zoom and Focus

a. Please use the adjustable feet to change the angle of the projector in order to achieve the most

suitable angle for projection on the screen.

b. Adjusting the lens by horizontal and vertical lens shift and adjust Zoom and Focus of lens

Method 1: Use the Keypad of

Lens Shift

▲▼◄►

Focus

Zoom

Method 2: Press the

LENS SHIFT

button on the remote control to access Lens Control-Lens Shift.

Use the

▲▼◄►

buttons to adjust the horizontal or vertical position of the lens.

Then press

ENTER

to adjust the Zoom and Focus of the lens.

Lens Control

[Enter] Shift Adjustment

Zoom

Focus

Lens Control

[Enter] Zoom/Focus Adjustment

Shift

Press Lens Shift once to

adjust Lens Shift

Enter

Press Enter to adjust the

Zoom and Focus

Method 3: Press the

MENU

button on the remote control or

Keypad and choose Advanced



Lens Control selected, then use the

▲▼◄►

buttons to adjust the horizontal or

vertical position of the lens. If want to adjust Zoom and Focus.
Press

ENTER

to adjust it.

Note : Please adjust the lens shift / zoom / focus after having passed 30 minutes which the projector turned on.

Note : Slight changes in the image position and/or focus may occur during the 30 minutes after the projector was

turned on.

If the room temperature and humidity changed from the time when adjusted the lens shift / zoom / focus,

please readjust as necessary.

Note: In anticipation of the changes after installation, please set up the image size including the margin from

the screen edge.

Содержание 9080WUSS



























































































Результаты поиска

Содержание 9080WUSS

Отзывы:

Dukane 9080WUSS, Руководство пользователя, Страница: 23 / 90

Результаты поиска

Содержание 9080WUSS

Отзывы: