background image

1

Projector

8980WU/8983W

8981/8984WU/8982W

User's Manual (detailed) 

Instant Stack Guide

Thank you for purchasing this product.

WARNING

  

►Before using this product, be sure to read all manuals for this 

product. After reading them, store them in a safe place for future reference.

►Follow all the instructions in the manuals or on the product. The manufacturer 

assumes no responsibility for any damage caused by mishandling that is beyond 

normal usage defined in the manuals.

NOTE

  • The information in this manual is subject to change without notice.

•The illustrations in this manual are for illustrative purposes. They may differ 

slightly from your projector.

• The manufacturer assumes no responsibility for any errors that may appear in 

this manual.

• The reproduction, transfer or copy of all or any part of this document is not 

permitted without express written consent.

Trademark acknowledgment

All the trademarks in this manual are the properties of their respective owners.

Various symbols are used in this manual. The meanings of these symbols are 

described below. 

A b o u t   t h i s   m a n u a l

WARNING

CAUTION

NOTICE

This symbol indicates information that, if ignored, could possibly 

result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly result 

in personal injury or physical damage due to incorrect handling.
This entry notices of fear of causing trouble.
Please refer to the pages written following this symbol.

Features

This projector can be used with another projector of the same model to project an 

image on the same screen using the Instant Stack feature.

The two projectors can be operated simultaneously to make the image brighter.

Moreover, if you connect two projectors with RS-232C cross-over cable, it turns to 

a kind of intellectual stacking system. The two projectors can work alternately by 

themselves, and once one projector has an accident the other voluntarily starts to 

work to keep your presentation going.

These features, generically called Instant Stack, provide you with the broad use.

430-8980WU-8981-8982W-8983W-8984WU-Instant_Stack_Guide-00

Содержание 8980WU


































Отзывы: