4. Using On-Screen Menu
71
CEILING FRONT
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the [CONTROL PANEL LOCK] function.
NOTE:
• This [CONTROL PANEL LOCK] does not affect the remote control functions.
• How to release the [CONTROL PANEL LOCK]
1. When the projector is projecting image or in the sleep mode, press and hold the INPUT button on the projector cabinet for about
10 seconds. The [CONTROL PANEL LOCK] will be released.
2. When the projector is in the standby mode, press and hold the POWER button on the projector cabinet. It enables to power on
the projector. After checking the projector is projecting image, perform the previous step 1.
TIP:
• When the [CONTROL PANEL LOCK] is turned on, a key lock icon [ ] will be displayed at the bottom right of the menu.
Enabling Security [SECURITY]
This feature turns on or off the [SECURITY] function.
Unless the correct keyword is entered, the projector cannot project an image. (
→
)
NOTE:
• Your setting will not be affected even when [RESET] is done from the menu.
Selecting Communication Speed [COMMUNICATION SPEED]
This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to
38400 bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be con-
nected (depending on the equipment, a lower baud rate may be recommended for long cable runs).
NOTE:
• Your selected communication speed will not be affected even when [RESET] is done from the menu.
