Dukane 6645UL Скачать руководство пользователя страница 123

Страница: 123 / 172

6. Using the VIEWER

104

6-6. Changing the logo data (background image)

• You can change the screen of the input terminal in a signal-less state (background logo) or the

background image of the MultiPresenter start-up screen (MultiPresenter logo).

• You can also set a password to prohibit third parties from changing the pictures.

• You can set pictures that satisfy all of the following conditions.

Format

JPEG or PNG pictures that can be displayed with the [VIEWER]

Resolution

Below the panel resolution of the projector

PE455UL: WUXGA (1920 × 1200)

PE455WL: WXGA (1280 × 800)

PE505XL: XGA (1024 × 768)

File size

1 megabyte or less

1. Display the file list screen.
2. Move the cursor to the picture to set

in the background logo or the Multi

Presenter logo and press the MENU

button.

The pop-up menu will be displayed.

3. Move the cursor to [LOGO] and press

the ENTER button.

The sub-menu will be displayed.

①

Setting the background logo or MultiPresenter logo

1. Move the cursor to [SET TO BACKGROUND LOGO] or [SET TO MultiPresenter LOGO] in the

sub-menu and press the ENTER button.

• If a [LOGO PASSWORD] has been set, enter the [LOGO PASSWORD] when the [LOGO PASS

WORD] input screen appears.

• A screen to confirm whether to change the logo or not is displayed.

2. Move the cursor to [YES] and press the ENTER button.

②

Initializing the background logo or MultiPresenter logo

1. Move the cursor to [RESET BACKGROUND LOGO] or [RESET MultiPresenter LOGO] and

press the ENTER button.

• If a [LOGO PASSWORD] has been set, enter the [LOGO PASSWORD] when the [LOGO PASS

WORD] input screen appears.

• A screen to confirm whether to initialize the logo or not is displayed.

2. Move the cursor to [YES] and press the ENTER button.

Содержание 6645UL













































































































































































Результаты поиска

Содержание 6645UL

Отзывы:

Похожие инструкции для 6645UL

Бренды по названию

Популярные бренды

Dukane 6645UL, Руководство пользователя

Результаты поиска

Содержание 6645UL

Отзывы:

Похожие инструкции для 6645UL

Бренды по названию

Популярные бренды