Duerkopp Adler 669 Premium Скачать руководство пользователя страница 89

Страница: 89 / 154

Programming

Operating Instructions 669 PREMIUM - 00.0 - 11/2016

Exit the submenu using the

ESC

◄

button



The changed values are stored immediately.

If necessary, create further seam sections or exit Programming
mode using the

ESC

button.



The program is saved. The machine switches to Automatic
mode and the newly created program is selected.

5.6.5

Adjusting parameters for the selected program

This menu allows the parameters for the current program/seam
program to be changed. This setting affects all seam sections
created in the program.

To adjust the parameters for the selected program:

Use

◄

►

to select the field

Press the

button.



The submenu opens.

Use

▲

▼

to select the desired parameter.

Press the

button to activate or deactivate the parameter

or use

▲

▼

to edit the value and confirm the change by press-

ing the

button.

Edge Guide

•

Gap

Edge stop (if available); value for the distance between
the needle and the material edge.

Symbol

Description

Содержание 669 Premium



























































































































































Результаты поиска

Содержание 669 Premium

Отзывы:

Duerkopp Adler 669 Premium, Руководство по эксплуатации, Страница: 89 / 154

Результаты поиска

Содержание 669 Premium

Отзывы: