Duerkopp Adler 669 Premium, Руководство по эксплуатации

Страница: 58 / 154

Programming
56 Operating Instructions 669 PREMIUM - 00.0 - 11/2016
5.4.3 Setting the Thread cutter parameter
(
Thread Trim
)
Set whether the thread cutter is activated or deactivated at the
end of the seam.
5.4.4 Setting the Thread clamp parameter
(
Thread Clamp
)
If a thread clamp is present, this function can be activated or
deactivated here. The thread clamp is closed for the 1
st
stitch of
the seam to ensure that the needle thread lies on the underside
of the sewing material.
5.4.5 Setting the Initial alignment stitch parameter
(
PointPos.°
)
The distance of the needle from the material can be adjusted
to allow precise positioning of the sewing material when starting
sewing. The value entered here corresponds to the degree number
on the handwheel.
Menu item Setting option
(
Thread Trim
)
Thread cutter
ON = on
OFF = off
Menu item Setting option
(
Thread Clamp
)
Thread clamp
ON = on
OFF = off
Menu item Setting option
(
PointPos.°
)
Initial alignment stitch
function
000 – 359 [°]