Ducati Superbike 848evo Corse, Руководство пользователя

Страница: 52 / 144

51
Clock setting function
This function is used to set the clock time.
To set the clock, select the “TIME Set” page from
the menu.
Holding switch (12, fig. 6) pressed in position B “
▼
“
for 3 seconds in this menu page gives access to the
setup mode.
When you access this function, the text “AM“
flashes; if you press switch (12, fig. 6) in position B
“
▼
” the text “PM” flashes; if you press switch (12,
fig. 6) in position B “
▼
” mode will go back to
previous setting (if it is 00:00, when toggling from
“AM” to “PM”, 12:00 will be displayed).
Pressing switch (12, fig. 6) in position A “
▲
“ gives
access to the hour setting mode; hours start to flash.
Each time you press the button in position B “
▼
“,
the digit will increase by one hour. If the switch is
held pressed in position B “
▼
” the number increases
cyclically in steps of one hour every second (when
the switch is held depressed, the hours do not flash).
Pressing switch (12, fig. 6) in position A “
▲
“ gives
access to the minute setting mode; minutes start to
flash. Each time you press the button in position B
“
▼
“, the digit will increase by 1 minute. If you hold
the switch down in position B “
▼
”, the count
B
B
B
B
B
A
A
A
A
A
A
B
fig. 29
B = ON for 3 secs.
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing