Ducati Superbike 1199 Panigale ABS Скачать руководство пользователя

Страница: 289 / 300

Attention

If the rear sprocket needs replacing, contact a

Ducati Dealer or Authorized Service Center.

If improperly replaced, this component could

seriously endanger your safety and that of your

passenger, and cause irreparable damage to your

motorcycle.

Frame

aluminum alloy cast monocoque frame.

aluminum alloy cast rear subframe.

Steering head angle: 24° 50'

Steering angle: 27° on the left / 27° on the right.

Trail: 100 mm.

Wheels

Front

Three-spoke, light-alloy forged rims.

Size: MT3.50x17"
Rear

Three-spoke, light-alloy forged rims.

Size: MT6.00x17"

Tires

Front

Tubeless, radial tire.

Size: 120/70.
Rear

Tubeless, radial tire.

Size: 200/55.

Suspensions

Front

Hydraulic upside-down fork provided with external

adjusters for rebound and compression damping and

preload (for inner springs of fork legs).

Stanchion diameter:

50 mm, TiN coated.

Wheel travel:

4.72 in (120 mm).
Rear

The shock absorber is adjustable for rebound,

compression and spring preload.

The shock absorber is connected to the crankcase at

the front pivot point and to the rocker arm at the rear

pivot point.

The swinging arm is connected to the pivot shafts

going through the engine. The whole system gives

the bike excellent stability.

Wheel travel:

5.12 in (130 mm).

288

Содержание Superbike 1199 Panigale ABS













































































































































































































































































































Результаты поиска

Содержание Superbike 1199 Panigale ABS

Отзывы:

Похожие инструкции для Superbike 1199 Panigale ABS

Бренды по названию

Популярные бренды

Ducati Superbike 1199 Panigale ABS, Руководство пользователя

Результаты поиска

Содержание Superbike 1199 Panigale ABS

Отзывы:

Похожие инструкции для Superbike 1199 Panigale ABS

Бренды по названию

Популярные бренды