Ducati Multistrada MTS 1200S D-Air Скачать руководство пользователя страница 344

Страница: 344 / 443

Tank filler plug

Opening

Lift flap (1) and insert the active or passive key in the

lock. Turn the key clockwise by 1/4 of a turn to release

the lock.

Lift the plug (2).

Closing

Close the plug (2) with the key inserted and push it

down into its seat. Remove the key and close flap (1)

protecting the lock.

Note

Plug can only be closed when key is inserted.

Warning

After refuelling, always make sure that the plug

is perfectly in place and closed.

Fig. 221

Fig. 222

343

Содержание Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Результаты поиска

Содержание Multistrada MTS 1200S D-Air

Отзывы:

Ducati Multistrada MTS 1200S D-Air, Руководство пользователя, Страница: 344 / 443

Результаты поиска

Содержание Multistrada MTS 1200S D-Air

Отзывы: