Ducati MULTISTRADA 950 страница 11 Скачать руководство пользователя

Страница: 11 / 293

Intended use

Attention

This motorcycle was designed for both road use

and for light off-road and dirt road use. Heavy duty

off-road use is not advised and can result in the rider

losing control of the vehicle, thereby increasing the

risk of accidents.

Attention

This motorcycle may not be used to tow any

trailers or with a side-car attached; this can lead to

loss of control and result in an accident.

This motorcycle carries the rider and can carry a

passenger.

Attention

The total weight of the motorcycle in running

order with rider, passenger, baggage and additional

accessories must not exceed 465 kg / 1025.15 lb.

Attention

The maximum weight permitted for the side

panniers, top case and the tank bag must never

exceed 30 kg (66 lb), divided as follows:

10 kg (22lb) max. per side pannier;

5 kg (11 lb) max. for the top case;

5 kg (11 lb) max. for the tank bag.

Attention

The maximum speed permitted with the side

panniers, the top case and the tank bag fitted must

not exceed 180 km/h (112 mph) and at any rate it

must comply with the applicable statutory speed

limits.

Содержание MULTISTRADA 950






































































































































































































































































































Результаты поиска

Содержание MULTISTRADA 950

Отзывы:

Похожие инструкции для MULTISTRADA 950

Бренды по названию

Популярные бренды

Ducati MULTISTRADA 950, Руководство пользователя

Результаты поиска

Содержание MULTISTRADA 950

Отзывы:

Похожие инструкции для MULTISTRADA 950

Бренды по названию

Популярные бренды