Ducati Hypermotard 950 Скачать руководство пользователя страница 260

Страница: 260 / 288

Check engine oil level

Check the engine oil level through the sight glass (1)

on the clutch cover.

Oil level should be between the marks on the sight

glass. If the level is low, top up with engine oil.

Ducati prescribes the only use of SAE 15W -50/JASO

MA2 oil and recommends the use of Shell Advance

4T Ultra 15W -50 oil (JASO: MA2 and API: SN).

Remove the oil filler cap (2) and top up until the oil

reaches the required level. Refit the plug.

Important

UK VERSION: Ducati recommends you use

Shell Advance DUCATI 15W-50 Fully Synthetic Oil.

Attention

Engine oil and oil filters must be changed by a

Ducati Dealer or Authorised Service Centre at the

intervals specified in the scheduled maintenance

chart in this booklet (sub-section “Scheduled

maintenance plan”).
To check the oil level correctly, carefully follow the

instructions below.

1) The level should be checked at warm engine, about

15 minutes after the engine has been stopped.

2) Turn off the engine and wait 10\15 minutes to

allow the oil to flow completely inside the sump.

3) Position the bike with both wheels on a flat ground

and in straight position.

4) Then, check the engine oil through the sight glass.

5) If the oil level is below the middle line between the

MIN and MAX marks, add oil until reaching the

maximum level indication.

Attention

Never exceed the MAX mark.

Fig 220

259

Содержание Hypermotard 950

































































































































































































































































































Результаты поиска

Содержание Hypermotard 950

Отзывы:

Бренды по названию

Популярные бренды

Ducati Hypermotard 950, Руководство пользователя

Результаты поиска

Содержание Hypermotard 950

Отзывы:

Бренды по названию

Популярные бренды