Ducati 1299 Panigale S 2015, Руководство пользователя, Страница: 97 / 321

Note
When the LAP function is active, the FLASH
button takes on the dual function of high beam
"FLASH" and LAP timer start / stop (new lap start
indication).
Note
The TRIP FUEL function always has top priority
over the LAP function: in case of activation of the
TRIP FUEL function with active LAP function, the LAP
timer view is automatically removed and TRIP FUEL
information is displayed instead.
LAP recording
If the LAP function is active, it is possible to record
the lap time, for a total of 30 consecutive laps.
Operation:
-
When the FLASH button (3) is pressed for the
first time, the instrument panel displays the timer
with resolution of a tenth of a second (0’00’’0);
- upon any further press on the FLASH button (3),
the just ended lap number and time are displayed
for 5 seconds with a resolution of one hundredth
of a second: even if the "LAP" function is not
displayed, the lap is displayed for 5 seconds all
the same and then the selected function will be
displayed (e.g. LEAN);
- after these 5 seconds, the instrument panel goes
back to lap timer page referred to the new current
lap.
- the next time rider pushes the FLASH button (3)
or any equivalent command, lap timer is
reactivated.
If the time is never stopped, it will roll over upon
reaching 9 minutes, 59 seconds and 99 hundredths;
the lap timer starts counting from zero and will keep
running until the lap is stopped or the recording
function is disabled.
Laps are numbered from 01 to 30 and are in a loop:
after the first 30 laps the instrument panel will
overwrite information starting from Lap 01.
If the LAP function is interrupted (switching to ROAD
screen or temporary disabling or key-off) and then
reactivated (going back to TRACK screen or
reactivation or key-on), but memorised laps are not
96