Ducati 1299 Panigale S 2015 Скачать руководство пользователя страница 117

Страница: 117 / 321

Warnings/Alarms (Warning)

The instrument panel manages a number of

warnings / alarms, aimed at giving useful information

to the rider during use.

Upon Key-On, if there are any active warnings, the

instrument panel displays the present warnings.

During normal use, whenever a warning is triggered,

the instrument panel automatically displays the

warning. Whenever a warning is triggered, it is

displayed for 5 seconds in a (well-visible icon) "large"

size and then continues being displayed in the small

size ("small" icon).

If several warnings are active, the corresponding

icons will be displayed one after the other, each

remaining on display for 3 seconds.

When warnings are activated, no warning light will

come on.

116

Содержание 1299 Panigale S 2015


































































































































































































































































































































Результаты поиска

Содержание 1299 Panigale S 2015

Отзывы:

Ducati 1299 Panigale S 2015, Руководство пользователя, Страница: 117 / 321

Результаты поиска

Содержание 1299 Panigale S 2015

Отзывы: