Close top, making sure that Velcro®
closure fits snugly. Loop both belts
through buckles.
Slip main unit and/or external
monitor into either side of the
car mount.
Place both belts over headrest;
position unit so that screen is at
comfortable viewing level, then
tighten belts.
Note: Be sure that mounting belts
are fastened tightly to hold unit
securely in case of sudden stops.
The headrest mounts provide the convenience of mounting the main unit and the external
monitor to the back of a vehicle’s headrest without any tools or modifications.
Note:
Power off the XDVD270 main unit and disconnect any external connections before attaching
the headrest mounts.
19
XDVD270
OPERATION
Using the Headrest Mounts
Home Use
Table Top
The main unit and external monitor have
a built-in easel-style stand to permit
viewing in any location in the home. The
stand is located on the back of both units.
Place your thumb under the indentation,
and pull up. The units can now be propped
on a tabletop or any other solid, even
surface.
