Du Pont Cyrel FAST 2000TD, Руководство по эксплуатации

Страница: 53 / 106

Control panel
3-15
User settings
User settings cover the settings for width and type
of nonwoven material.
NOTE: Always check/set width after
change of the nonwoven supply roll.
1. To enter 'User settings' press the 'User
settings' button.
2. Select the type of nonwoven presently
installed in the processor from the 'Nonwoven
type' drop down list.
NOTE: It is only possible to select
from predefined nonwoven types.
A new nonwoven type can be added
only via the configuration menu, and
only by authorized personnel.
3. There are 2 options for inputting the
Nonwoven width:
Select the Nonwoven width by using one of
the 2 quick set buttons or press the
'Nonwoven width' field to open the numeric
keypad.
4. If nonwoven widths other than the standard
quick set button widths are required, enter the
width according to the roll label into the
numeric keypad and press the “Enter” key.
The minimum and maximum values that can
be entered are:
Minimum: 900mm (35.4”)
Maximum: 1200mm (47.2”)
Setting of the correct width of the nonwoven is
VERY important because the setting
determines the tension of the nonwoven, PET
and waste rolls.
January, 2020 Operation Manual | Cyrel FAST 2000TD