SLICE Distributor
User’s Manual
February 2018
14
13000-30030-MAN (Rev. 3)
Appendix C: Hardware Configuration Specifications
SLICE Distributors are typically delivered with a default IP address as follows:
IP address
192.168.0.x where:
x = 1-9 for S/Ns SD00001-SD00009;
x = 10-99 for S/Ns SD00010-SD00099;
x = 100 for S/Ns SD00100, SD00200, SD00300;
x = 101 for S/Ns SD00101, SD00201, SD00301;
x = 2-99 for S/Ns SD00102-SD00399
Netmask
255.255.252.0
The calibration data for your equipment identifies the IP address as shipped from the factory.
If the calibration data is not available, try using the default address described in the table
above.
If you need information on the specifics of your equipment, please submit a request through
the DTS Help Center web portal (
) and include the serial number(s) of
the equipment and parameters you are asking about.