Dtronics Nano Sync Manual
Document version v1.1
V1.00 :
Initial document
V1.10 :
Changed sync1 / sync2 parameter for PPQ speed
INTRODUCTION
Congratulations on your purchase of the Dtronics Nano Sync.
The Dtronics MS-
06 converts midi timing signals to adjustable DIN-
sync and Jack-
sync
outputs.
Features:
•
Midi to sync converter with programmable clock dividers/multipliers.
•
Din sync output and Jack sync output can be set to different clock speeds.
24 / 48 or 96PPQn
•
Jack sync output for 1:1 to 1:127 of the clock input.
Led that shows the current clock speed (1/24 of clock frequency). And RUN status.
Power input: 9 to 12V DC, max 100mA. + on center pole.
Latency: <350uS
Clock edge difference between dinsync out1 and dinsync out2: 60nS
This product has been carefully engineered and thoroughly tested to guarantee
optimum performance and user satisfaction for many years to come.
Please read these instructions carefully!
