background image

25

5.2

IDE DRIVERS INSTALLATION

INF files enable the Intel® 810 and Intel® 820 Chipsets to be recognized by listed
operating systems.  This installer will unpack updated .INF files into a specified
folder.

Supported operating system:

Microsoft Windows* 95 OSR2.1+ and Windows*
98 operating system

Chipset:

Intel® 810 and Intel® 820 Chipsets

Browse the All-in-one Multimedia CD-ROM to the directory \Intel\82810\IDEinf\
and click setup.exe.

5.3

AUDIO/AC97 ON BOARD DRIVERS
INSTALLATION

I.

 

AD1881 AC97 Audio Drivers for Win95 or Win98 First Edition

Browse the All-in-one Multimedia CD-ROM to the directory
\AD1881\Win95\ and click setup.exe to install the Audio Drivers.  And
browse the All-in-one Multimedia CD-ROM to the directory
\AD1881\Win95\Midi\ and click setup.exe to install the MIDI Drivers.

II.

 

AD1881 AC97 Audio Drivers for Win98 Second Edition or Win2000

Browse the All-in-one Multimedia CD-ROM to the directory \AD1881\WDM\
and click setup.exe to install the Audio Drivers.

III.

 

AD1881 AC97 Audio Drivers for WinNT

Browse the All-in-one Multimedia CD-ROM to the directory
\AD1881\WinNT\ and click setup.exe to install the Audio Drivers.  And
browse the All-in-one Multimedia CD-ROM to the directory
\AD1881\WinNT\Midi\ and click setup.exe to install the MIDI Drivers.

Содержание PRM-23I









































Отзывы: