DTI WINCO PSS15B2W/A Скачать руководство пользователя страница 16

WINCO,  Incorporated warrants to the original purchaser for 12 months that goods manufactured
or supplied by it will be free from defects in workmanship and material, provided such goods are
installed, operated and maintained in accordance with Winco written instructions.

WINCO’s sole liability, and Purchaser’s sole remedy for a failure under this warranty, shall be
limited to the repair of the product.  At WINCO’s option, material found to be defective in material or
workmanship under normal use and service will be repaired or replaced.  For warranty service,
return the product within 12 months from the date of purchase, transportation charges prepaid, to
your nearest WINCO Authorized Service Center or to WINCO, Inc. at Le Center Minnesota.

THERE IS NO OTHER EXPRESS WARRANTY.

To the extent permitted by law, any and all warranties, including those of merchantability and fitness
for a particular purpose, are limited to 12 months from date of purchase.  In no event is WINCO
liable for incidental or consequential damages.

Note: Some states do not allow limitation on the duration of implied warranty and some states do
not allow the exclusion or limitation of incidental or consequential damages, so the above limita-
tions may not apply in every instance.  This warranty gives you specific legal rights which may vary
from state to state.

WINCO reserves the right to change or improve its products without incurring any obligations to
make such changes or improvement on products purchased previously.

EXCLUSIONS:

WINCO does not warrant Engines, Batteries, or Other Component Parts that are warranted by
their respective manufacturers.

WINCO does not warrant modifications or alterations which were not made by WINCO, Inc.

WINCO does not warrant products which have been subjected to misuse and/or negligence or
have been involved in an accident.

225 SOUTH CORDOVA AVE
LE CENTER MN 56057
Phone: 507-357-6831

P/N 60706-169
4190-00

Содержание WINCO PSS15B2W/A

















Отзывы: