![DTI Fast-Tach Скачать руководство пользователя страница 1](http://html1.mh-extra.com/html/dti/fast-tach/fast-tach_manual_2535864001.webp)
LIMITED WARRANTY: Design Technology, Inc. warrants that for a period of ONE (1) YEAR from the time
of purchase it will repair or replace the
Fast-Tach
at no charge, if it fails to function properly due to defect in
materials or workmanship. Damage due to improper care or use is expressly excluded from this warranty. All
implied warranties are limited to the use of this instrument as directed above and Design Technologies does not
assume of or authorize anyone to assume for it any other obligation. The instrument should be returned, prepaid
to Design Technology Inc. for warranty consideration
Design Technology, Inc.
768 Burr Oak Drive
Westmont, IL 60559
630.920.1300
(Fax: 630.920.0011)
www.tinytach.com
The
Fast-Tach
is “Pulse” activated tachometer - i.e. the pulses
generated by the ignition system on any gasoline engine can be
detected and activate the electronic tachometer. The tach can
be set to display proper RPM on a single cylinder as well as multi
cylinder, two or four cycle, engine. By aiming the tach towards the
spark plug at a distance of approx. 0 to 15 inches (0 to 35 cm) the
tach will display proper engine RPM. The tach can also display the
MAXIMUM RPM recorded after checking the RPM of an engine.
Basic operation:
1.
To start the
Fast-Tach
push the ON button and the
Fast-Tach
is ready to display the actual RPM of an
engine that produces 1 spark per revolution (
to change
spark pulses per revolution see page 2
). Hold the tach
0 to 15 inches (0 to 35 cm form the spark plug.)
2.
Fast-Tach
will save the Maximum rpm that the unit has read.
To view press the On/Mode button and the
“MAX”
will appear on the
display
(to reset MAX rpm see page 2)
3.
Fast-Tach
will turn OFF automatically after 1 minute.
See back for advanced operations
➜
Features:
Activation:
Pulses from the ignition triggers the
Fast-Tach
to read engine RPM
.
Fast-Tach
can be set to properly record any single or multi cylinder
engine, 2 or 4 cycle by changing the display mode (see advanced
operation pg2). Default setting is 1 pulse per revolution (360°)
adjustable to 1 pulse per every 2 revolutions (720°) or 2 pulses per
revolution (180°)
Acuracy:
+- 10 rpm in default mode and +- 20 in 720° mode. Display updated
every 0.5 seconds
Max reading:
19,99
0
RPM
Battery:
Lithium 3V (CR2430) - Replacable
Wireless Tachometer