8
DYNertia3 Quick Start (Inertia- Chassis type)
Two Main DYNertia3 Windows (DYNO / GRAPH)
Press the “
DYNO
” / “
GRAPH
” button to change between the 2 main Windows of DYNertia3.
The ‘
DYNO
’
Window
is used to select and create files, enter the weather details, record vehicle test data, ‘teach’ gear
ratios, view RPM/speed and control the testing.
Note:
This Window is only visible when the control unit is connected, powered and ‘Linked’.
Note:
The Row of gauges (input channel
data) shown along the bottom of the
screen are visible with a single monitor.
With duel monitors this data is displayed
on the second monitor instead and
replaced with the test ‘comments’ field
(also found in ‘View’ menu).
The
‘
GRAPH
’
Window displays the Power and Torque as traces that can be overlayed and analysed. Traces from a test
Run can be selected, loaded from file and compared.
Note:
The ‘Setup’ menus (and most
menus) discussed in the following pages
are only accessible from this GRAPH
screen (t
hey are ‘greyed’ out in DYNO
screen)
Note:
The RPM/Speed button makes
the software use either units of RPM or
speed (e.g. kph) for the controls,
displays and graphs.
Note:
When test Runs are visible on the
graph we refer to them as ’traces’.
Note:
The DYNertia3 Window does not size itself to the PC screen, if you wish you can adjust your PC screen resolution
to best suit (Program Window size is1024 x 768)
