AEON-LT HEVC 4K Transmitter
Commercial in Confidence
Revision: 1.0
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2018 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 5-11
5.3.2
Status Menu
The Status menu is displayed on boot up, or select
Status
from the top-level menu and press the tick
button.
Scroll through the status parameters by pressing the up/down arrow buttons. The status parameters will let
you know how the AEON-TX is setup and how it is performing.
5.3.3
Config Menu
Select
Config
from the top-level menu and press the tick button.
Scroll through the config parameters by pressing the up/down arrow buttons. The following tables show the
sub-menus that can be edited from the
Config
menu.
Video
Sub-Menu
Options
Description
Encoding
Mode
H.264 AVC
H.265 HEVC
The video encoding mode.
Video
Format
720p50/59/60
1080i50/59/60
1080p23/24/25/
29/30/50/59/60
2160p23/24/25/
29/30/50/59/60
The video format.
Sample
Format
2SI
SQD
2 Sample Interleave (2SI) – each 3G-SDI link contains a full image at
1/4 resolution.
Square Division (SQD) – each 3G-SDI link contains one quarter of the
original image.
Chroma
Format
4:2:2
4:2:0
The level of chroma sampling required.
Chroma
Depth
10-bit
8-bit
The number of bits per pixel.
Quad Sync
Off
On
Set this On to synchronise four non time-aligned HD sources.
Video
Latency
Normal
Low
Ultra-Low
Improved latency can come at the expense of picture quality.
Manual
Mode
Off
On
If set to On, enables
CPB delay
.
CPB Delay
09000kb/s
default
Coded Picture Buffer Delay. Used in ultra-low delay mode to improve
picture quality, please contact DTC for guidance.
