AEON-LT HEVC 4K Transmitter
Commercial in Confidence
Revision: 1.0
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2018 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 4-9
4.
Getting Started
4.1
Introduction
This chapter gives the information required to power up and control an AEON-LT unit.
4.2
Power
There is no power switch, the AEON-LT will start the moment the power supply is connected.
Power can be supplied to the AEON-LT in two ways:
Via an AB or V mount battery, depending on the battery mounting plate
Via a 9.2–17.8VDC input to the power connector on the bottom panel
4.3
User Control
Once power has been supplied, the only method to configure and monitor the AEON-LT is by the OLED
display and control buttons. See
chapter 5
