38 of 3
②
The user can set up the delay execution time of fire via the “Delay start time (0-300s)” when the
system has detected the input of fire message. Please note: unit of seconds is used. If it is “0”, it
indicates no delay and it shall be executed immediately;
③
“Digital Voice Type” is used to select the type of EVAC voice message to be played or broadcasted,
which may be the “EVAC Voice” and “Alert Voice”;
④
“Digital voice index” is used to set up the built-in voice message index in the Folder “evac_message”
or “alert_message” in the SD card to be played in case of any fire; “Play mode” is used to set up the
playing or broadcasting way (it is used for playing the voice message of many segments);
⑤
“CONTACT” is used to set up the output partition and output online relay of each contact of current
devices or equipment in case of any fire, namely, one quick operation: multiple operations are integrated
into one operation to facilitate the user to respond quickly in case of an emergency, which is similar to
the group configuration and operation in the microphone, with the exceptions:
(1) The grouping (groups) shall be manually operated and the contact is mostly used for the linkage via the third-party
system in case of uncertainty factors or any emergency;
(2) The grouping operation does not contain the relay output, but the contact contains the relay output, which is easy or
convenient to control the third-party system to realize the linkage.
Precaution: after completing the modification, please click the “Application”. Otherwise, your setting cannot achieve your
expected purpose in the corresponding equipment.
2.4.3.3.3. Grouping Configuration of the System
Click “Group” in “SYSTEM CONFIGURATION”, as shown below:
Notes:
1. “ID” is a number automatically generated by the system, without any practical significance;
2. “NAME” is used for the user to take a meaningful sign for the groups he has configured, which facilitates the
memory of operations, for example, the groups can be configured as shown below (system default value is
“GROUP 01...). The user double-clicks the corresponding item to enter the Edit Status (at most 12 valid
characters). Press the “Enter” on the keyboard to quickly enter the next group;
3. “WORK PARTITION” lists the partition list (zone list) contained by the current groups. The user can
double-click this item to carry out the addition and deletion of the sub-groups:
