*
*
Mixer Amplifier
1
1. Features
This public address set is suitable for shops, halls, rooms and other places to use. The set
contains an amplifier and two broadcast speakers. The amplifier can drive the same model of
six speakers. Additional broadcast speakers can be purchased separately. If you purchase
10v/3w broadcast speakers, the number of speakers can be more.
This set uses 10V constant voltage transmission innovatively. Compared with traditional
100V transmission, the transmission voltage is lower than 24V electrician standard so it is
safer, and does not need to be installed by professionals. Compared with the constant
resistance transmission, the trouble of load series parallel calculation is solved. Because the
transmission power is small, it will not cause the problem of large line loss.
In this set, both the amplifier and speakers have no inter-line transformer, so there are no
problems such as loss, distortion, and poor stability caused by the inter-wire transformer.
The output voltage of the amplifier in this set is 10V, which should not be paired with
speakers with non-10V input, and the input voltage of speakers in this set is 10V, which
should not be matched with amplifiers with non-10V output.
Features of the mixer amplifier: built-in MP3player; support decoding formats such as MP3,
WMA, WAV, APE and FLAC; with MIC input on the front panel; MIC input with priority
level (When you speak, it can automatically keep the sound of music down, and the music
automatically recovers when you stop.) and karaoke reverberation function; with Bluetooth
function and one line input which could be connected with mobile phone or audio source
equipment like DVD with 10V output.
Features of the speaker: This structure can block damage to the loudspeaker diaphragm
caused by bigger size of spiders, cockroaches, termites, bugs and other insects. With high
sensitivity, wide frequency response, small distortion and other advantages, it is not only
suitable for playing human voice but also suitable for playing music. It is designed with 10V
constant voltage input.
