User Manual
AUBION X.8
24/29
9.2.5 Line-In 1 to 8
All eight Line-Inputs are available on the D-SUB25 socket on the rear of the device. Line-
In 1 to 4 can also be connected to the Mic-/Line-Ins 1 to 4 (see section 9.2.4).
Technical data of Line-In of 25-contact D-type connector
Specification
Eight balanced line inputs at D-type-socket
contacts; AC-coupled.
Max. Level (0 dBFS
peak
)
+21 dBu, +12 dBu, +6 dBu, +3 dBu dependent on
Line-In gain (refer to section 6.1.7).
Frequency Response
@f
s
= 48 kHz: 20 Hz...20 kHz (<0.2 dB)
THD+N (full bandwidth)
< 0.003% @21 dBu
< 0.001% @12 dBu and 6 dBu
< 0.002% @3 dBu
(<0.0003% @ 21 dBu and f > 10 kHz)
Input Impedance
Dependent on Max. Level (or gain resp.):
1.9 kOhm @21 dBu, 2.5 kOhm @12 dBu,
5.0 kOhm @6 dBu, 15.0 kOhm @3 dBu
Mates with
AES59 (TASCAM) D-type male connector.
Different from AES59: Channel order reversed for
device serial numbers SN “11-1029-…”!
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Line-In
1+ 1- 2+ 2- 3+ 3- 4+ 4- 5+ 5- 6+ 6- 7+ 7- 8+ 8-
Pin#
24 12 10 23 21 9 7 20 18 6 4 17 15 3 1 14
Shield-Pin#
2, 5, 8, 11, 16, 19, 22, 25
n.c.
13
Valid for device serial numbers SN “11-1029-…”:
Line-In
1+ 1- 2+ 2- 3+ 3- 4+ 4- 5+ 5- 6+ 6- 7+ 7- 8+ 8-
Pin#
1 14 15 3 4 17 18 6 7 20 21 9 10 23 24 12
Shield-Pin#
2, 5, 8, 11, 16, 19, 22, 25
n.c.
13
