dSPACE CLP1104, Установка и настройка оборудования

Страница: 28 / 170

Installing the Hardware
▲ ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
DS1104 Hardware Installation and Configuration March 2004
I
■■■■■■■■■■■■■ ▼
28
■■■■■■■■■■■■■■■ ▼
Connecting a Connector Panel
to the Board
The CP and CLP connector panels provide easy-to-use connections
between the board and external devices. Devices can be individually
connected, disconnected or interchanged without soldering. This
simplifies system construction, testing and troubleshooting.
The CLPs additionally provide arrays of LEDs, which indicate the states
of the digital signals.
Connecting
CP/CLP to a board
After you have installed the board in the host PC, you can connect the
accompanying panel to the board. For detailed instructions, refer to
How to Connect a Panel (CP, CLP) to a Board on page 29.
Mounting panels
in a rack
As a standard, the CP and CLP connector panels are installed in a
desktop box made from aluminum profiles. They can optionally be
mounted in a 19’’ industry rack. For instructions, refer to How to
Mount a Panel in a 19'' Rack on page 30.
T
For the connector pinouts of CP1104/ CLP1104, refer to
CP1104/CLP1104 Connectors on page 88