Document:
RE-TCC7 0B8
Document:
RE-TCC7 0B8
Update:
February 2008
Update:
February 2008
Page:
1
Page:
1
OWNER'S MANUAL
RE-TCC7 22X Zoom Camera
Product description
RE-TCC7 it is a high performance camera for
applications
CCTV
that
require the highest quality
video.
It has
perspective
integrated
motorized with autofocus which can be remotely
controlled
through
a
traditional console command in voltage or via serial RS485.
Main features
SONY CCD ExView high resolution 520 TVL Zoom 220x. Optical 22x + 10x
digital zoom Focal length 3.9 to 85 mm Autofocus
Zoom control possible via rear keyboard, traditional console with 12VDC control and RS485
console PelcoD Protocol in 2400.
Possibility of
Setting the zoom to a level
default that the camera will keep even after power failure. E 'can use the camera as if he had
fixed optical zooming only for the focal adjustment, without remote control.
Minimum Illumination 0.005 Lux
function day / night to night vision B / W and compatibility with IR illuminators
Function DSS (Digital Slow Shutter). It allows viewing with minimal lighting, without the use
of IR illuminators. This technology is to hold in memory the video frame and condense them into a
single frame. The refresh time of the image decreases but increases the resilience with minimum
illumination.
ICR function (Infrared Cutfilter Removable). The IR filter which is necessary for the
operation of the color CCD is mechanically removed in the dark. In this way, the camera is more
sensitive infrared lighting
and, unlike the cheaper day / night cameras, the colors are faithful even with little natural light.
Star Light Function.
vertical and horizontal Mirror function for
the
rollover image in reverse shots.
Star Light Function for greater sensitivity to low brightness
OSD (On Screen Display), via programming screen MENU controllable with rear buttons.
Titler to overlay the camera name
Connections and controls
BNC video output
- Top right
BNC video output
- Top right
It connects the video cable that connects to monitor or management
devices typically through RG59 type coaxial cable and BNC connector.
Clamps DC12V-GND -
Need
Clamps DC12V-GND -
Need
Clamps DC12V-GND -
Need
Clamps DC12V-GND -
Need
connect a 12VDC power supply stabilized by at least 500 mA, as the RE-AL4S model. IF the
power supply is provided with a cylindrical pin it is necessary to cut and separate the conductors
2 +/-. The positive, as a rule recognizable by the cable marked with dashed lines, it should be
connected to terminal 12VDC, the negative to the GND terminal. power
D.C. allows
install the cameras without protection (request if the power supply is 220V), as well as to power
the camera with a battery in case of blackouts. Attention to use STABILIZED feeders that
provide 12V in any load condition. The use of
a different supply voltage from 12VDC can generate video disorders and in the worst cases
damage the camera.
Beware extension power cables are too long or
small section,
that could
to introduce
excessive voltage drop.
Clamp Zoom
- Used to
Clamp Zoom
- Used to
controlling the zoom camera via
the application
of
a
12VDC voltage, as in the case of the use of
consoles
the
control of motorized lenses, such as RE-CZ2. By applying
12VDC
on
ZOOM
is
NEGATIVE
control of motorized lenses, such as RE-CZ2. By applying
12VDC
on
ZOOM
is
NEGATIVE
control of motorized lenses, such as RE-CZ2. By applying
12VDC
on
ZOOM
is
NEGATIVE
control of motorized lenses, such as RE-CZ2. By applying
12VDC
on
ZOOM
is
NEGATIVE
control of motorized lenses, such as RE-CZ2. By applying
12VDC
on
ZOOM
is
NEGATIVE
control of motorized lenses, such as RE-CZ2. By applying
12VDC
on
ZOOM
is
NEGATIVE
on
COM
the zoom moves to the TELE position. By applying
12VDC
on
COM
the zoom moves to the TELE position. By applying
12VDC
on
COM
the zoom moves to the TELE position. By applying
12VDC
on
COM
the zoom moves to the TELE position. By applying
12VDC
on
COM
is
on
COM
is
on
COM
is
NEGATIVE
on
ZOOM
the zoom moves to the WIDE position.
NEGATIVE
on
ZOOM
the zoom moves to the WIDE position.
NEGATIVE
on
ZOOM
the zoom moves to the WIDE position.
NEGATIVE
on
ZOOM
the zoom moves to the WIDE position.
Focus Terminal -
It is used to adjust the focus of the camera's focus by applying a 12VDC
Focus Terminal -
It is used to adjust the focus of the camera's focus by applying a 12VDC
voltage, as in the case of console use for the control of motorized goals, such as RE-CZ2. For
this application must connect
12VDC
on
FOCUS
is
this application must connect
12VDC
on
FOCUS
is
this application must connect
12VDC
on
FOCUS
is
this application must connect
12VDC
on
FOCUS
is
this application must connect
12VDC
on
FOCUS
is
NEGATIVE
on
COM
or reverse the polarity to move the focus forward or backward.
NEGATIVE
on
COM
or reverse the polarity to move the focus forward or backward.
NEGATIVE
on
COM
or reverse the polarity to move the focus forward or backward.
NEGATIVE
on
COM
or reverse the polarity to move the focus forward or backward.
Terminal MENU -
It is used to enter the MENU of the camera to an external device via the
Terminal MENU -
It is used to enter the MENU of the camera to an external device via the
application of a 12VDC voltage, as in the case of a console for use
the control objectives
motorized, such as RE-CZ2. For this application must connect the
12VDC
on
MENU
is
NEGATIVE
on
motorized, such as RE-CZ2. For this application must connect the
12VDC
on
MENU
is
NEGATIVE
on
motorized, such as RE-CZ2. For this application must connect the
12VDC
on
MENU
is
NEGATIVE
on
motorized, such as RE-CZ2. For this application must connect the
12VDC
on
MENU
is
NEGATIVE
on
motorized, such as RE-CZ2. For this application must connect the
12VDC
on
MENU
is
NEGATIVE
on
motorized, such as RE-CZ2. For this application must connect the
12VDC
on
MENU
is
NEGATIVE
on
motorized, such as RE-CZ2. For this application must connect the
12VDC
on
MENU
is
NEGATIVE
on
COM.
Upon application of the voltage is shown on the screen the camera programming menu and
COM.
Upon application of the voltage is shown on the screen the camera programming menu and
it is possible to choose the options by acting on the ZOOM commands and previous FOCUS.
Terminal COM -
To be used as explained in the previous sections.
Terminal COM -
To be used as explained in the previous sections.
485 / A + B- -
Here you can connect a device control PTZ via RS485 serial line as a console
485 / A + B- -
Here you can connect a device control PTZ via RS485 serial line as a console
485 / A + B- -
Here you can connect a device control PTZ via RS485 serial line as a console
for dome camera or a VCR
gifted
of
command to speed dome. In this way
it will be possible
control
the
zoom
camera by the recording equipment or by software. Connection is made using a twisted pair cable
and connecting with A + and B- with RS485B-.
The
protocol
communication to be used is the common
Pelco D 2400 bds.
The camera address (default: 001)
communication to be used is the common
Pelco D 2400 bds.
The camera address (default: 001)
communication to be used is the common
Pelco D 2400 bds.
The camera address (default: 001)
is set in the program as described below.
Control buttons -
The TELE / WIDE buttons are used to manually operate the ZOOM.
Control buttons -
The TELE / WIDE buttons are used to manually operate the ZOOM.
The NEAR and FAR buttons
manually change the focus. Pressing the middle button will appear superimposed on the camera
setup MENU. hen the configuration is meni screen you will be using the TELE and WIDE buttons
to move through the options, the KEY TO ENTER function to confirm data or select an option,
NEAR KEY with EXIT function for
abandon / leave.
Led ON / OFF
- The camera is equipped with a red LED
Led ON / OFF
- The camera is equipped with a red LED
rear that signals the presence of applied power.
fixing
- The camera is provided without bracket
fixing
- The camera is provided without bracket
Fixing that must be purchased separately. The thread for the bracket is formed on a removable
block which can be fixed both below the camera both above for ceiling mounting
