Document:DK-V1E 2A2
Page:1
USER MANUAL
DK-V1E Dash Cam Car Camera
DSE srl - Digital Surveillance Equipment - www.dse.eu
DK-V1E
Black box car camera and video
recorder
Composition of the product
1.
Dashcam camera
2.
Suction cup bracket
3.
USB power cable from car lighter
Product description
DK-V31E is a car video recorder with built-in dual camera
and third rear camera. It is ideal to be mounted on the
windshield with the bracket included and to monitor
everything that happens around the vehicle.
1 - CONNECTION FOR SUCTION CUP BRACKET
2 - SPEAKER
3 - OBJECTIVE
4 - MINI USB FOR LIGHTER CABLE
5 - MICROSD CARD SLOT (NOT INCLUDED)
6 - RESET BUTTON
7 - ON / OFF IGNITION, START / STOP RECORDING
7 - MODE AND MENU SELECTION
8 - DOWN BUTTON
9 - FORWARD BUTTON / WIFI
10 - BACK / AUDIO ON / OFF BUTTON
11 - MONITOR 1.8 "
Insert the microSD card
The first thing to do, if you want to make recordings, is to
insert the micro SD card into the appropriate slot in the
DVR (5)
It is possible to use micro SD cards with capacities up to
64GB in CLASS 10 or higher. The SD card is not included
in the package.
As an indication, consider that one hour of continuous
recording takes up about 6.5GB, so a 64GB SD card can
hold about 10 hours of recording.
The camera is normally able to start recording
immediately without having to format the MicroSD card. It
may happen, using a 64GB SD card that the camera
continues to report an absent microSD card, despite
having been inserted. In this case, the micro SDcard must
be previously formatted in FAT32 using a computer,
before inserting it into the camera.
Installation of the dashcam with cigarette
lighter power supply
The dashcam is supplied with a cigarette lighter power
cable that takes the 12VDC from the lighter and supplies
5VDC to the camera, with MiniUSB connector.
It is the fastest way to install the dashcam.
The camera should be positioned near the rear view
mirror, in order to have a good front view. The best
position is towards the passenger side, as shown, so as
not to obstruct the driver's view.
Most vehicles only supply power to the cigarette lighter
with the ignition on. In this case, the camera will turn on
and off automatically together with the vehicle panel.
Some vehicles supply power to the lighter constantly,
even when the vehicle is stationary. In this case you will
have to turn the dashcam on and off manually with the
front ON / OFF button.
The supplied lighter cable can easily be hidden along the
edge of the rear window, passing under the gaskets.
Installation of the dashcam with power supply
from the fuse control unit
If you want to install the dashcam so as not to have
visible cables inside the vehicle, you can separately
purchase our installation kit, in the MiniUSB version,
suitable for this dashcam.
The kit includes the cables and connectors to connect to
the vehicle's fuse box. It also includes a 12V / 5VDC
transformer with battery saver that is able to disconnect
the dashcam when the vehicle's battery starts to run out,
a very useful function if you use the dashcam with the
vehicle stationary.
NOTE: This model only requires the connection of the +
BAT and GND cable as the ACC cable is not supported.
For the installation of the dashcam kit you can consult the
specific installation kit manual.
