Document:
DK-HT2-1M7
Document:
DK-HT2-1M7
Document:
DK-HT2-1M7
Page:
1
Page:
1
OWNER'S MANUAL
DK-HT2 - camouflage camera for the campaign
DSE srl - Digital Surveillance Equipment - www.dse.eu
DK-HT2
Camera with battery camouflage VCR
Product description
DK-HT2 is a camera with a video recorder on an SD card in a watertight container and mimetic
developed for outdoor surveillance. It includes a microphone for recording sound.
And 'it powered by AA batteries and SD card recording to internal memory. The batteries and SD
card are not included. Thanks to its infrared sensor, the camera remains in stand-by for a long
time by consuming very little battery and starts recording only in the presence of movements.
The camera has an infrared illuminator with invisible LED that allows viewing in the dark up to
about 30 meters.
Inserting batteries
DK-HT1 works with normal AA batteries, both
normal and rechargeable. They can put 4 or 8
depending on autonomy
that
Yes
It requires. With 8 batteries the camera has a
range of about 7 months in stand-by.
Insert the SD Card
The first thing to do is to insert the micro SD card into
this slot in DVR. To access the SD card compartment
is necessary to open the front cover. Caution
to the
sense
of
inserting the SD card that will slide into place only
with the gold contacts facing upward, as shown in the figure.
The package does not include an SD card, or the SD card reader for your computer that you must
purchase separately.
E 'can use any micro SD card with a capacity of
4 to 64 GB CLASS 10
or higher. An SD card
E 'can use any micro SD card with a capacity of
4 to 64 GB CLASS 10
or higher. An SD card
E 'can use any micro SD card with a capacity of
4 to 64 GB CLASS 10
or higher. An SD card
class 10 has a 10 MB / s write speed. Do not use the SD card with a lower rate because it could
lead to malfunction.
registration
The camera records audio and video in VGA resolution adjustable, 720P or 1080P (Full HD) with
H264 compression. You can use any SD card (or micro SD card with adapter) with a maximum
capacity of 64GB. One minute of footage in Full HD 1080 takes up about 80MB. A
32GB SD card can hold up to 6 hours of video, a 64GB over 12 hours. The camera also records
audio.
Motion detection with infrared sensor PIR
The camera records in motion detection, namely registers only in the presence of living beings in
front of it. The word living beings, is not accidental because this camera does not use, like most
of our other systems, changing pixels to detect the intruder but an infrared sensor such as those
used in alarm systems. This does not detect the movement of objects such as bushes or
branches and consuming very little on standby can wait for months intrusion. The apparatus
records
file
Video of the length
programmable from 1 to 120 seconds.
Configuration
The camera is controlled with the keyboard and internal monitor.
First, you notice that the device has two power buttons: TEST / OFF and ON
TEST / OFF
- Press this button will launch the device in test mode. And 'the mode that is used to
TEST / OFF
- Press this button will launch the device in test mode. And 'the mode that is used to
position the camera and set the functions. In this test mode, you can also record still images with
manual controls. Pressing this button for 3 seconds to turn off the camera.
ON
- briefly pressing this button will start the normal surveillance functionality of the camera that
ON
- briefly pressing this button will start the normal surveillance functionality of the camera that
allows you to record in accordance with the detections of the front sensor.
in test mode settings
First you should start the unit in test mode to set operating options as needed and to position the
camera. Press the red button TEST. The DVR will beep and will start up the on-screen setup
menu.
