DSC PowerSeries PC1404 V1.1, Руководство по установке, Страница: 28 / 56

5 Programming Worksheets
21
[011] PC5204 PGM Output Programming
[012] Keypad Lockout Options
Note: If Keypad Lockout is active, the panel CANNOT be disarmed with a keyswitch.
[013] First System Options
[014] Second System Options
[015] Third System Options
[016] Fourth System Options
Default
01
I_______I_______I
PGM 11
01
I_______I_______I
PGM 12
01
I_______I_______I
PGM 13
01
I_______I_______I
PGM 14
Default
000
I_______I_______I______I
Number of Invalid Codes Before Lockout (Valid entries are 000-255)
000
I_______I_______I______I
Lockout Duration (in minutes) (Valid entries are 000-255)
Opt. Def. ON OFF
1  Normally Closed Loops

 End-of-line Resistors
2  Double End-of-Line Resistors

 Single End-of-line Resistors
3

 Panel Shows All Troubles While Armed  Panel Shows Fire Troubles While Armed
4  Tampers/Faults Do Not Show as Open

 Tampers/Faults Show As Open
5

 Auto-Arm Schedule in [
*
][6] + Installer Prog.  Auto-Arm Schedule in Installer Prog. Only
6

 Audible Exit Fault Enabled  Audible Exit Fault Disabled
7  Zone Doubling Enabled

 Zone Doubling Disabled
8  Temporal Three Fire Signal Enabled

 Standard Pulsed Fire Signal
Note: When Option 7 is ON, the configuration of Options 1 and 2 should be ignored.
Opt. Def. ON OFF
1

Arm/Disarm Squawk Enabled
 
Arm/Disarm Squawk Disabled
2  Bell Squawk During Auto Arm On

 Bell Squawk During Auto Arm Off
3

For Future Use
 
4  For Future Use


5

For Future Use
 
6  For Future Use


7

Exit Delay Termination Enabled
 
Exit Delay Termination Disabled
8  Fire Bell is Continuous

 Fire Bell Follows Bell Cut-off
Opt. Def. ON OFF
1

 [F] Key Enabled  [F] Key Disabled
2  [P] Key Audible (Bell/Beeps)

 [P] Key Silent
3  Quick Exit Enabled

 Quick Exit Disabled
4

 Quick Arming Enabled ([ ][0] and Function Keys)  Quick Arming Disabled (Function Key Requires Code)
5  Code Required for Bypassing

 No Code Required
6  Master Code Not Changeable

 Master Code Changeable
7

 TLM Enabled  TLM Disabled
8  For Future Use


Opt. Def. ON OFF
1   AC Trouble Displayed  AC Trouble Not Displayed
2

Trouble Light Flashes if AC Fails
 
Trouble Light Does Not Flash if AC Fails
3  Blank Keypad When Not Used   Keypad Always Active
4

Code Required to Remove Keypad Blanking
 
No Code Required
5   Keypad Backlighting Enabled  Keypad Backlighting Disabled