Dru Maestro 60/2 Tall RCH, Руководство по установке

Страница: 14 / 68

I nst allation manual
1 4
7.2 Additional installation options
The appliance can be placed with a platform. This can be done in combination with a lower decorative strip or with
the platform connecting to the glass. The accompanying chimney breast can be used with or without a false wall
(see fig. 7-4 and 7-5). It is also possible to have the interior plate of the appliance continue to the outside. In that case, the
chimney breast or other heat-resistant materials can be placed up to the side pane(s) (see fig. 7-6).
3
Do not allow the weight of the platform to rest on the appliance, use the assembly set instead. It can be ordered
separately.
7.2.1 Platform combined with lower decorative strip
(see fig. 7-4 (A and C) and 7-5 (A and C))
1
Create a recess in the platform, in which the appliance will be placed. If a false wall is used, the recess will be less deep.
1
Mutually adjust the height of the appliance and assembly set, so that the top side of the platform connects to the
bottom side of the lower decorative strip.
7.2.2 Platform connecting to the glass
(see fig. 7-4 (B and D) and 7-5 (B and D))
1
Create a recess in the platform, in which the appliance will be placed. If a false wall is used, the recess will be less
deep. Maximum material thickness is 30 mm.
1
Remove the lower decorative strip (see fig. 7-6) by sliding it forward and taking it out. It will not be placed back.
1
Remove the centring cam at the bottom of the decorative strip by cutting into it at the front and breaking it off.
Make sure the bottom side of the decorative strip remains flat and resistant to corrosion.
1
Loosen the nuts of the adjustable profiles by a few turns and adjust the profiles to the correct height. The height
depends on the material thickness of the platform. For material thickness 20 mm and 30 mm, indicators have been
applied. Re-tighten the nuts (see fig. 7-6).
1
Mutually adjust the height of the appliance and assembly set, so that the bottom side of the platform connects to
the adjustable profiles.
3
- Do not allow the weight of the platform to rest on the appliance and/or the adjustable profile.
- Ensure that the base is not installed too high, otherwise the glass pane may come into contact with the base when
open, which may cause damage.