Dru 0063CT3681, Руководство по установке

Страница: 39 / 48

9.5.2 Wireless
The wireless connection is divided into 2 types:
- Connection via a ‘modbus’ protocol.
- Control via an application.
3
Only 1 type of wireless connection is possible on the communication module.
9.5.2.1 Connection via ‘modbus’ protocol
Wireless connection of a home automation system to the receiver is possible via a connection according to the ‘modbus’
protocol. Such a connection can only be established with a communication module (see fig. 9-1 (W)). This module can be
ordered from DRU. This communication module translates the ‘modbus’ protocol from the home automation system into
a wireless signal to the receiver.
When connecting a home automation system via the communication module to the receiver, proceed as follows:
1
Use the remote control to test whether the location where the communication module will be placed is within the reach
of the receiver.
1
Place the remote control on this location and test the reception sensitivity (RSSI).
1
Press the 'on/off' button and 'down arrow' at the same time. The value that is now visible, must be between -20 and -70
(see User Manual, “Reception Sensitivity”). If needed, hold the remote control closer to the appliance in order to improve
the reception.
1
Connect the communication module by means of an RJ45 plug, according to the instructions in the manual that is
supplied with this module.
1
Now follow the steps described in the ‘modbus’ protocol manual. It is available from the supplier of the home
automation system.
9.5.2.2 Control via application
Also when operating the appliance via a tablet provided with the DRU Control App (iOS or Android), you will need a
communication module. This module can be ordered from DRU.
In order to control the application via the DRU Control App, proceed as follows:
1
Use the remote control to test whether the location where the communication module will be placed is within the reach
of the receiver.
1
Place the remote control on this location and test the reception sensitivity (RSSI).
1
Press the 'on/off' button and 'down arrow' at the same time. The value that is now visible, must be between -20 and -70
(see User Manual, “Reception Sensitivity”). If needed, hold the remote control closer to the appliance in order to improve
the reception.
1
Connect the communication module by means of an RJ45 plug, according to the instructions in the manual that is
supplied with the communication module.
1
Use the instructions for the application in order to install it.
3
- The DRU Control app functions in accordance with the multicast and communication protocol. Ensure the router is
equipped with this. For this, consult the router's installation manual.
- If the DRU Control app is used, the thermostat function no longer applies. The ‘DRU Control’ application is available
from the Appstore, via GooglePlay or the DRU website: www.drufire.com
I nst allation manual
3 9