Dru 0063CT3681, Руководство по установке

Страница: 29 / 48

I nst allation manual
2 9
8.3 Wood set
The appliance is supplied with a wood set.
3
In the figures, the colour is not always shown correctly.
3
Observe the following instructions to prevent unsafe situations:
- Only use the supplied wood set.
- Place the wood set exactly according to the description.
- Keep the ionization and spark plug and the surrounding space free (see fig. 8-4 and 8-5).
- Make sure there is no vermiculite dust on the burner.
3
Place logs exactly as described, because otherwise:
- The main burner will not ignite properly; which could result in unsafe situations.
- Contamination will occur much faster due to soot.
- The flame picture is disrupted.
8.3.1 Placing the wood set
The wood set consists of a number of logs (see fig. 8-6), vermiculite (see fig. 8-7), chips (see fig. 8-8), glow material (see fig.
8-9) and ash (see fig. 8-10).
1
Fill the V-shaped burner with vermiculite; evenly spread the vermiculite (see fig. 8-11). The vermiculite should not get
higher than the edge of the burner.
A
B
D
C
E
F
38P-0798-0 8-6
38P-0610
38P-0611
8-4
8-5