DRS Technologies Tamarisk 320 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 83

background image

©Copyright 2013, DRS TECHNOLOGIES, Inc.- All rights reserved.

13532 N. Central Expressway

Dallas, TX 75243

877.377.4783

www.drsinfrared.com

The contents of this document may not be reproduced in whole or in part

without the written consent of the copyright owner.

NOTICE
ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED

WITHOUT WARRANTY OF ANY KIND. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE ARE

PROVIDED “AS IS” WITH ALL FAULTS. DRS DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE,

OR TRADE PRACTICE.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT

SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE

LICENSE OR LIMITED WARRANTY, CONTACT YOUR DRS REPRESENTATIVE FOR A COPY.

IN NO EVENT SHALL DRS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT

LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF DRS HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Rev History

Revision Number

Release Date

Description

C

03/15/2012

Initial Release

D

07/24/2012

Added customer NV read write commands, pixel map,
and AGC ROI Commands

E

11/1/2013

Ported over Tamarisk®640 revision B.2 document.
Change this document for Tamarisk®320. Corrected
non-volatile default values. Added version
requirements for certain features. Clarified 0xd7
command. Made changes in preparation for public
release. New ICE Commands added

Camera Link® is a registered trademark of the Automated Imaging Association.

«
1
2
3
4
...
»

Содержание Tamarisk 320




















































































Отзывы:

Нет отзывов

Похожие инструкции для Tamarisk 320

Бренд: GE Страницы: 81

Бренд: IBS Страницы: 24

Бренд: Samsung Страницы: 1

iPOLiS SNP-3120

Бренд: Samsung Страницы: 1

Бренд: Samsung Страницы: 7

Бренд: Samsung Страницы: 23

iPOLiS SNP-3120

Бренд: Samsung Страницы: 2

iPolis SNO-5080R

Бренд: Samsung Страницы: 60

Бренд: Yada Страницы: 20

Бренд: Tamron Страницы: 9

Бренд: OBSBOT Страницы: 4

Бренд: Olympus Страницы: 8

Бренд: Aurora Страницы: 2

Бренд: G-Sau Страницы: 18

Бренд: GENUS Страницы: 10

Бренд: TZT Страницы: 12

Бренд: SVP Страницы: 1

Бренд: Grundig Страницы: 98

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды