SECTION 3
GETTING STARTED
PAGE 62
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev A
STEP
ACTION
CONDITION OR INDICATION
NOTE
If you used the OOBE on-
screen keyboard, you must
manually turn it off or it will
appear each time you restart
the computer.
4.
Once you finish the OOBE, if you do
not want the on-screen keyboard to
appear each time you log on, click on
the keyboard
Options
key and Select
Control whether the On-Screen
Keyboard starts when I log on
.
5.
Un-check
Use the On-Screen
keyboard
.
T urning the C omputer O n Normally
Turn the computer on by pressing the
Power
button for at least 1 sec and then releasing it. The
ARMOR X7 will perform self-checking routines during the start-up process. All units are
configured at the factory to automatically boot to the Microsoft Windows desktop unless a
custom configuration has been requested.
T urning the C omputer O ff Normally
To turn the computer off normally, select
Start
à
Shut Down
from the Windows desktop. The
computer will perform a normal shutdown.
NOTE:
There is a 5-10 second delay before you can
restart the computer after a complete shutdown.
NOTE
Unless you have changed the default action of the Power button, pressing
the Power button when the computer is running will not cause it to shut
down but will put the computer into Sleep mode and the screen will go dark.
This could be mistaken for a power off condition while the computer is
actually still running and consuming battery power. When the computer is in
sleep mode, the blue Power LED on the indicator panel will flash slowly.
