background image

14. WARRANTY 

 
All products manufactured and marketed by Dropsa are warranted to be free of defects in material or workmanship for a period 
of at least 12 months from date of delivery. Extended warranty coverage applies as follows: 
 
Complete system installation by Dropsa: 24 Months. 
 
All  other  components:  12  months  from  date  of  installation;  if  installed  6  months  or  more  after  ship  date,  warranty  shall  be 
maximum of 18 months from ship date. 
 
If a fault develops, notify Dropsa giving: 

 

a complete description of the alleged malfunction 

 

 the part number(s) 

 

test record number where available (format xxxxxx-xxxxxx) 

 

date of delivery  

 

date of installation  

 

operating conditions of subject product(s) 

 
We  will  subsequently  review  this  information  and  supply  you  with  either  servicing  data  or  shipping  instruction  and  returned 
materials authorization (RMA) which will have instructions on how to prepare the product for return.  
 
Upon prepaid receipt of subject product to an authorized Dropsa Sales & Service location, we will then either repair or replace 
such product(s), at out option, and if determined to be a warranted defect, we will perform such necessary product repairs or 
replace such product(s) at our expense. 
Dropsa reserves to right to charge an administration fee if the product(s) returned are found to be not defective. 
 
This limited warranty does not cover any products, damages or injuries resulting from misuse, neglect, normal expected wear, 
chemically  caused  corrosion,  improper  installation  or  operation  contrary  to  factory  recommendation.  Nor  does  it  cover 
equipment that has been modified, tampered with or altered without authorization. 
 
Consumables and perishable products are excluded from this or any other warranty. 
 
No  other  extended  liabilities  are  states  or implied  and  this  warranty  in no  event  covers  incidental  or  consequential damages, 
injuries or costs resulting from any such defective product(s). 
 
The use of Dropsa product(s) implies the acceptance of our warranty conditions. Modifications to our standard warranty must 
be in made in writing and approved by Dropsa.

 

 
 
 
 
 
 

Содержание K000455









Отзывы: