DROPSA 989v2, Руководство по эксплуатации и обслуживанию

Страница: 6 / 33

6
1.4.4. Operations that void the warranty
Any attempt to disassemble, modify or tamper with a component of the
MACHINE
by the user or by
unauthorised personnel voids the warranty and releases the M
ANUFACTURER
from any liability on
any damage whether to people or things stemming from said tampering.
T
HE
M
ANUFACTURER
is also released from any responsibility and the warranty on the
MACHINE
will be
void in the following cases:

unforeseen use of the machine (on the subject, see the chapter Improper use of the
MACHINE
);

opening of the upper cover of the reservoir of the
MACHINE
(
SPECIFICALLY LEAD SEALED
) and/or
filling of the reservoir without the use of the included filling nozzle and relative filter.

use contrary to the requirements of the prevailing standards in the country of use;

INSTALLATION OF THE MACHINE
in conditions other than those specified in the Transport and
Installation chapter ;

hook-up that does not comply with the specifications found in the Transport and Installation
chapter ;

use of work equipment other than what is specified in the Use of the
MACHINE
and the
Maintenance and Demolition chapters ;

total or partial failure to follow the instructions in this manual;

lack of or incorrect maintenance;

use of non-original replacement parts or parts not specified by the M
ANUFACTURER
.
The machine is a
grease pump , designed and constructed to feed an automatic lubrication system
for systems or machinery in accordance with its technical specifications.
The machine uses an electric motor which, by means of a ratio motor, allows an eccentric system
to be driven which allows the pumping of GREASE from the included pumping element. Also by
means of the same motor, a stirring paddle is driven which acts inside the reservoir for the
purpose of removing the grease from the walls of the same and push it downward, in other words,
toward the action of the pumping elements. Filling of the included reservoir must be carried out
only by gun, pump or automatic system, through the included filling nozzle.
All the moving parts are protected inside fixed guards made of metallic material.
The machine is supplied only with an electric motor and relative connection terminal strip. The
connection and management (timed, manual or based on a level reading) of the electric activation
is delegated to the customer.
2. DESCRIPTION AND TECHNICAL CHARACTERISTICS
The machine is available in different configurations , inferred by part numbers, identical to one
another as a system of operation, system of protection for the machine operators, residual risks
and operator interface, which differ in the following elements:

type of electric motor and relative specifications of the electrical power supply;

type of ratio motor;

number of pumping elements;