Twin Peaks Tremolo V3
drolo
Connecting and powering:
The power supply needs to be 9V/100ma center negative like the common BOSS power supplies:
Make sure the polarity of your power supply is correct or it will damage the pedal. D
o NOT run at higher voltages.
Since the pedal has a digital microprocessor operating with high frequencies, you might hear some high pitched noise if
you use it together on the same power supply with other pedals (daisy chained) even when it is off. The noise can bleed
through the power supply into the other pedal’s signal. This is normal for such devices. It might not be the case in your
particular setup but if you notice that, I would suggest using an isolated power supply for the tremolo.
