Drolet Optima DB03210 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 44

Drolet Optima DB03210 Скачать руководство пользователя страница 15

Optima Installation and Operation Manual

3.3

Manufactured Logs

Do  not  burn  manufactured  logs  made  of  wax  impregnated  sawdust  or  logs  with  any  chemical
additives. Manufactured logs made of 100% compressed sawdust can be burned, but use caution in
the number of these logs burned at one time. Start with one manufactured log and see how the stove
reacts. You can increase the number of logs burned at a time to
rises  higher  than  475  °F  (246  °C)  on  a  magnetic  thermometer  for  installation  on  single  wall  stove
pipes  or  900  °F  (482  °C)  on  a  probe  thermometer  for  installation  on    double  wall  stove  pipe
thermometer should be placed about
overheat and damage your stove.

Do not burn manufactured logs made of wax impregnated sawdust or logs with any chemical

Manufactured logs made of 100% compressed sawdust can be burned, but use caution in

the number of these logs burned at one time. Start with one manufactured log and see how the stove
reacts. You can increase the number of logs burned at a time to making sure the temperature never
rises higher than 475 °F (246 °C) on a magnetic thermometer for installation on single wall stove
pipes or 900 °F (482 °C) on a probe thermometer for installation on double wall stove pipe

about 18” (457 mm) above the stove. Higher temperatures

15

Do not burn manufactured logs made of wax impregnated sawdust or logs with any chemical

Manufactured logs made of 100% compressed sawdust can be burned, but use caution in

the number of these logs burned at one time. Start with one manufactured log and see how the stove

re the temperature never

rises higher than 475 °F (246 °C) on a magnetic thermometer for installation on single wall stove
pipes or 900 °F (482 °C) on a probe thermometer for installation on double wall stove pipe. The

Higher temperatures can lead to

«
...
13
14
15
16
17
...
»

Содержание Optima DB03210













































Отзывы:

Нет отзывов